Waterborne Paint SWD6006 elastic roof waterproofing coating material – SWD

short description:

Product Detail

Product Tags

Feedback (2)

Our company insists all along the quality policy of "product good quality is base of enterprise survival; buyer fulfillment will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" and also the consistent purpose of "reputation very first, shopper first" for Low Pressure Polyurea , Aliphatic Polyurea Coating , Spray Foam Roofing Systems , For more information, please contact us as soon as possible!

Waterborne Paint SWD6006 elastic roof waterproofing coating material – SWD Detail:

Features and benefits

The film is compact and has good adhesion force, integral forming waterproof system

Excellent anti-aging performance, long-term outdoor use will not fall off, or powder or color-changing, it will extend the service life.

Excellent flexibility in low temperature, -40 Centigrade

Anticorrosion and chemical resistance

Excellent waterproof, anti-mildew performance

Water based coating, environmentally friendly, toxic free, safe material.

Easy to apply, it is a replacement product to tar-based polyurethane waterproof coating

Product application scope

Concrete roof, steel roof, kitchen bathroom floor, bathroom, reservoir, basement, waterproof membrane and old roof SBS waterproof and renovation works (such as asphalt, PVC, SBS, polyurethane and other base)

Product information

Item	Results
Appearance	White or gray
Glossy	Matte
specific gravity (g/cm³⁾	1.12
Viscosity (cps )@20℃	420
Solid content (%)	71%±2%
surface dry time (h)	Summer: 1-2h, winter: 2-4h
theoretical coverage	0.17kg/m²(thickness 100um)

Physical property

Item	Test standard	Results
Hiding power (white or light color)/(g/m²)	JG/T235-2008	≤150
Dry time/h	JG/T172-2005	Surface dry time≤2; solid dry time≤24
Adhesion (cross cut method) / grade	JG/T172-2005	≤1
Impermeability	JG/T172-2005	0.3MPa/30min, Impermeable
Impact resistance /cm	JG/T172-2005	≥30
Tensile strength	JG/T172-2005	≥1.7Mpa
Elongation rate	JG/T172-2005	≥200%
Tear resistance,≥kN/m	JG/T172-2005	35
Temperature resistance of coating (5 cycles)	JG/T172-2005	Normal

Corrosion resistance property

Acid resistance ^c(5%H₂SO₄）	JG/T172-2005	168 h, normal
Salt spray resistance	JG/T172-2005	1000 h , no peel off, no peel off
Artificial accelerated anti-aging (1000h)	Tensile strength retention, %	85
Artificial accelerated anti-aging (1000h)	Elongation rate, %	≥150

Application environment

Environment temperature: 5-35℃

Humidity: ≤85%

Application instructions

Recommended dft (1layer)	200-300um
Recoating time (25℃)	Min:4h, Max: 28h
Recommended application method	Roller, brush

Application tips

The surface should be clean, without any oil, rust or dusts.

The remaining material is not allowed to pour back to the original drums.

It is water-based coating, don’t add other organic solvents or other coatings in it.

Product curing time

Substrate temperature	surface dry time	foot traffic	solid dry
25℃	40 min	12h	7d

Product storage and shelf life

Storage temperature：+5-35°C

Shelf life: 12 months (unsealed)

Keep the products seal well, store in cool and ventilated place, avoid direct sunshine exposure.

Package: 20kg/drum

Product health and safety information

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

Integrity declaration

SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.

Product detail pictures:

Related Product Guide:

We offer fantastic energy in high quality and enhancement,merchandising,profits and promoting and procedure for Waterborne Paint SWD6006 elastic roof waterproofing coating material – SWD , The product will supply to all over the world, such as: Hungary, California, Japan, We attained ISO9001 which provides solid foundation for our further development. Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments. It is our great honor to meet your demands. We are sincerely expecting your attention.

Waterborne Paint

The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.