OEM Spray Foam Insulation Products – SWD250 Spray Rigid Polyurethane Foam Building walls heat insulation material – SWD

short description:

Product Detail

Product Tags

Feedback (2)

Our target is always to satisfy our customers by offering golden support, superior value and high quality for Aliphatic Urethane Clear Coat , Polyaspartic Polyurea Floor Coating Systems , Polyurea Floor Coating , The mission of our firm should be to provide the best high quality goods with finest price tag. We've been on the lookout forward to doing organization with you!

OEM Spray Foam Insulation Products – SWD250 Spray Rigid Polyurethane Foam Building walls heat insulation material – SWD Detail:

Characteristics

SWD250 external wall rigid polyurethane foam is a new energy efficient insulation material which is instant sprayed-forming by A & B liquid under high pressure of spray gun. The liquid material has good fluidity and permeability under high pressure that be able to keep foaming inside the wall and firmly bond with the base to seal gaps. The adhesive strength(≥40Kpa) bonded with the base surpasses the tear strength of the rigid foam self, it will not peel off even the substrate occurs expansion and contraction. This product is acid and alkali resistant, solvent resistant and anti-aging, the service life is over 50 years which is fit for the service cycle of the building exterior walls and resolved all the problems of traditional materials’ frequent maintenance from water absorption, moisture absorption and leaking. SWD250 is environment-friendly safe applied with newly Eco friendly foaming agent that is solvent free, no volatile and no pollution in production and application process.

Specifications

Density	≥35kg/㎥
compressive strength	≥0.2Mpa
heat conductivity coefficient	≤0.022W/(m.k)
Water absorption rate v/v	≤2%
Dimensional stability(70℃ 48h)	≤1%
Closed-cell rate	≥95%
combustion performance	B2 class

The heat insulation effect fully meets and better than the requirements of heating residential parts in JGJ26-89 residential building energy efficient design standard. The fire retardant performance complies with GBJ16 Building Design Fire retardant code.

Recommended procedures

No.	Performance process
1	leveling the exterior wall substrate
2	clear up the exterior wall with no dust and Debris
3	brush the coating slurry
4	spray polyurethane rigid foam per instruction.
5	stick on the mesh cloth
6	use anti-crack putty to flat the surface
7	brush coatings or stick tiles.

Typical physical properties

Item	Test standard	Results
Pencil hardness		H
Adhesive strength（Mpa）metal base	HG/T 3831-2006	9.3
Adhesive strength（Mpa）concrete base	HG/T 3831-2006	2.8
Impermeability		2.1Mpa
Bending test (cylindrical shaft)		≤1mm
Abrasion resistance (750g/500r) mg	HG/T 3831-2006	5
Impact resistance kg·cm	GB/T 1732	50
Anti-aging, accelerated aging 1000h	GB/T14522-1993	Loss of light＜1, chalking ＜1

Application scope

heat insulation of building walls and roof

Shelf life

10 months (indoor with dry and cool conditions)

Packing

A component 250kg/bucket; B component 200kg/bucket.

Production places

Minhang Shanghai City, and Nantong coastal industrial park production base in Jiangsu (5% of the raw materials imported from SWD US, 60% from multinational company in Shanghai, 35% from local support)

Security

To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment protection. Do not even contact the surface of wet coating.

Global applicability

Our company aims to provide worldwide customers with standard coating products, however custom adjustments can be made to adapt and leverage different regional conditions and international norms. In this case, additional alternative product data will be provided.

Integrity declaration

Our company guarantees the reality of the listed data. Due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modifying the listed data without prior notice.

Product detail pictures:

Related Product Guide:

"Control the standard by the details, show the power by quality". Our organization has strived to establish a highly efficient and stable employees team and explored an effective high-quality command method for OEM Spray Foam Insulation Products – SWD250 Spray Rigid Polyurethane Foam Building walls heat insulation material – SWD , The product will supply to all over the world, such as: UK, panama, South Africa, With the growing of the company, now our products sold and served at more than 15 countries around the world,such as Europe,North America,Middle-east,South America,Southern Asia and so on. As we bear in our mind that innovation is essential to our growth, new product development is constantly.Besides, Our flexible and efficient operation strategies,High quality products and competitive prices are exactly what our customers are looking for. Also a considerable service brings us good credit reputation.

Pu Foam Spray