OEM Primers Manufacturers – SWD8008 two component cathodic disbonding metal – SWD
OEM Primers Manufacturers – SWD8008 two component cathodic disbonding metal – SWD Detail:
Product features and advantages
* greatly increase the adhesive strength with metal substrate
* excellent anticorrosion and wear resistance
* excellent cathodic disbonding resistance
* excellent waterproof & moisture resistance
* stable resistance to temperature change
* compatible with the following coating film
* avoid rust and corrosion and increase the service life
* high coverage rate to save cost
Application scopes
Anticorrosion coating for any metal structures, stainless steel, aluminum surface. Low surface treatment with rust on metal structure.
Product information
| Item | A component | B component |
| Appearance | light yellow liquid | color adjustable |
| Specific gravity(g/m³) | 1.03 | 1.25 |
| Viscosity (cps)@25℃ | 210 | 380 |
| Solid content (%) | ＞65% | ＞65% |
| Mix ratio (by weight) | 1 | 1 |
| Surface dry time (h) | 1-3h | |
| Recoating interval (h) | Min 3 h; max 24h (20℃) | |
| Theoretical coverage (DFT) | 0.12kg/㎡ film thickness 50μm | |
Typical physical properties
| Item | Test standard | Results |
| Tensile strength (dry metal surface) Mpa | ASTM D-3359 | 11.5 ( or substrate broken) |
| Impact resistance (kg.cm) | GB/T 1732 | 60 |
| Abrasion resistance (750g/500r) mg | GB/T 1732 | 11 |
| Temperature variation resistance (-40+180℃) 24h | GB/9278-1988 | Normal |
| Cathodic disbonding resistance [1.5v,(65±5)℃, 48h] | HG/T 3831-2006 | ≤15mm |
| Density g/cm3 | GB/T 6750-2007 | 1.08 |
Chemical resistance
| Acid resistance 50%H2SO4 or 15%HCI,30d | no rust, no bubbles, no peel off |
| Alkali resistance 50%NaOH, 30d | no rust, no bubbles, no peel off |
| Salt resistance 60g/L, 30d | no rust, no bubbles, no peel off |
| Salt spray resistance 1000h | no rust, no bubbles, no peel off |
| Oil resistance, 0# diesel, crude oil, 30d | no rust, no bubbles, no peel off |
| (For reference: Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data) | |
Product detail pictures:
Related Product Guide:
Our company insists all along the quality policy of "product quality is base of enterprise survival; customer satisfaction is the staring point and ending of an enterprise; persistent improvement is eternal pursuit of staff" and the consistent purpose of "reputation first, customer first" for OEM Primers Manufacturers – SWD8008 two component cathodic disbonding metal – SWD , The product will supply to all over the world, such as: Amsterdam, Yemen, Mali, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
By Miguel from New Delhi - 2018.12.22 12:52
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Betsy from New Delhi - 2017.06.29 18:55
Write your message here and send it to us
