OEM Polyaspartic Sealer Concrete Manufacturers – SWD8027 polyaspartic abrasion resistance floor coating – SWD

short description:

Product Detail

Product Tags

Feedback (2)

We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to deliver you with great provider of processing for Open Cell Urethane Foam , Polyurethane Foam Thermal Insulation , Lab Surface Polyaspartic , Only for accomplish the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment.

OEM Polyaspartic Sealer Concrete Manufacturers – SWD8027 polyaspartic abrasion resistance floor coating – SWD Detail:

Product descriptions

SWD8027 is a two-component material with aliphatic polyaspartic polyurea resin as the main film-forming material, with excellent corrosion resistance, color-change resistance and weather resistance. The product has high solid and low viscosity, good leveling, and meets the requirements of environmental protection; it has excellent workability, can be applied by any application method, and can be cured at low temperature 0 ° C in winter. The coating has excellent flexibility, wear resistance, impact resistance and chemical resistance. It is an ideal weather resistant and environment-friendly floor coating material.

Product application scope

Flooring of city Park Plaza, electronic plant, mechanical factory, chemical plant, pharmaceutical, food and other industrial floors, as well as various outdoor yellowing resistant and wear-resistant floors.

Product information

Item	A component	B component
Appearance	light yellow liquid	Color adjustable
Specific gravity(g/m³)	1.05	1.50
Viscosity (cps)@25℃	40-60	100-200
Solid content (%)	65	88
Mix ratio (by weight)	1	1
Surface dry time (h)	1
Pot life (h)@25℃	40min
Theoretical coverage (DFT)	0.15kg/㎡ film thickness 100μm

Physical properties

Item	Test standard	Results
Adhesion force (concrete base)		3Mpa
Pencil hardness		2H
Bending resistance (cylindrical)		≤1mm
Abrasion resistance (750g/500r) mg	HG/T 3831-2006	5
Impact resistance kg·cm	GB/T 1732	50
Anti-aging, artificial accelerated aging	GB/T14522-1993	Light loss < 1, pulverization < 1

Application instructions

Hand brush, roller

Air spray, with air pressure 0.3-0.5Mpa

Airless spray, with spray pressure 15-20Mpa

Recommend dft: 100-200μm (topcoat)

Recoating interval: min 2h, max 24h.

Application tips

Agitate part B uniform prior to application.

Strictly mix the 2 parts in right ratio and agitate uniform.

Seal the package well after use to avoid moisture absorption.

Keep the application site clean and dry, forbidden to contact with water, alcohols, acids, alkali etc

Product cure time

Substrate temperature	Surface dry time	Foot traffic	Solid dry time
+10℃	2h	24h	7d
+20℃	1.5h	8h	7d
+30℃	1h	6h	7d

Note: the curing time is different with environment condition especially when temperature and relative humidity changes.

Shelf Life

Storage temperature of environment: 5-35℃

* shelf life is from the manufacturing date and sealed condition

Part A: 10 months Part B: 10 months

* keep the package drum well sealed.

* store in cool and ventilated place, avoid sunshine exposure.

Package: part A: 25kg/barrel, part B: 25kg/barrel.

Product detail pictures:

Related Product Guide:

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for OEM Polyaspartic Sealer Concrete Manufacturers – SWD8027 polyaspartic abrasion resistance floor coating – SWD , The product will supply to all over the world, such as: Austria, Muscat, Ecuador, In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.

Advacoat Polyaspartic