OEM Polyaspartic Coatings Products – SWD8027 polyaspartic abrasion resistance floor coating – SWD

Product descriptions

SWD8027 is a two-component material with aliphatic polyaspartic polyurea resin as the main film-forming material, with excellent corrosion resistance, color-change resistance and weather resistance. The product has high solid and low viscosity, good leveling, and meets the requirements of environmental protection; it has excellent workability, can be applied by any application method, and can be cured at low temperature 0 ° C in winter. The coating has excellent flexibility, wear resistance, impact resistance and chemical resistance. It is an ideal weather resistant and environment-friendly floor coating material.

Product application scope

Flooring of city Park Plaza, electronic plant, mechanical factory, chemical plant, pharmaceutical, food and other industrial floors, as well as various outdoor yellowing resistant and wear-resistant floors.

Product information

Physical properties

Application instructions

Hand brush, roller

Air spray, with air pressure 0.3-0.5Mpa

Airless spray, with spray pressure 15-20Mpa

Recommend dft: 100-200μm (topcoat)

Recoating interval: min 2h, max 24h.

Application tips

Agitate part B uniform prior to application.

Strictly mix the 2 parts in right ratio and agitate uniform.

Seal the package well after use to avoid moisture absorption.

Keep the application site clean and dry, forbidden to contact with water, alcohols, acids, alkali etc

Product cure time

Note: the curing time is different with environment condition especially when temperature and relative humidity changes.

Shelf Life

Storage temperature of environment: 5-35℃

* shelf life is from the manufacturing date and sealed condition

Part A: 10 months     Part B: 10 months

* keep the package drum well sealed.

* store in cool and ventilated place, avoid sunshine exposure.

Package: part A: 25kg/barrel, part B: 25kg/barrel.