OEM Aliphatic Urethane Paint Manufacturers – SWD8031 solvent free polyaspartic anticorrosion coating – SWD

Features and benefits

* high solids, low density, with good leveling, the coating film is tough, dense, full bright

* excellent adhesive strength, good compatible with polyurethane, epoxy and other material.

* high hardness, good scratch resistance and stain resistance

* excellent abrasion resistance and impact resistance

* excellent anticorrosion property, resistance to acid, alkali, salt and others.

* no yellowing, no color change, no pulverization, anti-aging, it has excellent weather resistance and light and color retention.

* can be used as a topcoat direct to metal surface (DTM)

* this product is environmentally friendly and contains no benzene solvents and lead compounds.

* can be applied in the low temperature of -10℃, the coating is dense, fast cure.

Application scopes

Anticorrosion and protection of steel structures, storage tanks, containers, valves, natural gas pipelines, frames, axles, shelves, tank trucks, swimming pools, sewage pools, chemical cofferdams, etc.

Product information

Typical physical properties

Chemical resistance

Application temperature

Application instructions

Hand brush, roller

Two component ratio-variable high pressure airless spray machine

Recommend dft: 200-500μm

Recoating interval: min 0.5h, max 24h

Application tips

Agitate part B uniform prior to application.

Strictly mix the 2 parts in right ratio and agitate uniform, use up the mixed material in 30 minutes.

Seal the package well after use to avoid moisture absorption.

Keep the application site clean and dry, forbidden to contact with water, alcohols, acids, alkali etc

Product cure time

Note: the curing time is different with environment condition especially when temperature and relative humidity changes.

Shelf life

Storage temperature of environment: 5-35℃

* shelf life is from the manufacturing date and in sealed condition

Part A: 10 months     Part B: 10 months

* keep the package drum well sealed.

* store in cool and ventilated place, avoid sunshine exposure.

Package: part A: 7.5kg/barrel, part B: 15kg/barrel.   

Product health and safety information

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

Integrity declaration

SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.