High-Quality Spray Foam Roofing Systems Manufacturers –  SWD900 spray polyurea elastomer anticorrosion waterproof protective coating  – SWD

products

High-Quality Spray Foam Roofing Systems Manufacturers – SWD900 spray polyurea elastomer anticorrosion waterproof protective coating – SWD

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

We've one of the most innovative manufacturing devices, experienced and qualified engineers and workers, recognized good quality handle systems and also a friendly experienced income team pre/after-sales support for Polyurethane Foam Casting , Heat Cured Polyurea , Aliphatic Polyurea Coating , We have now four leading solutions. Our products are most effective sold not only during the Chinese market, but also welcomed during the international industry.
High-Quality Spray Foam Roofing Systems Manufacturers – SWD900 spray polyurea elastomer anticorrosion waterproof protective coating – SWD Detail:

Product features and advantages

*Solvent free, 100% solids, safe, environmentally friendly and odor free.

*Rapid cure, can be sprayed forming on any bent, slope and vertical surfaces without sagging.

*Dense coating, seamless, with good flexibility.

*High adhesive strength, fast bonding well on steel, concrete, wood, glass fibers and other substrates. 

*Excellent impact resistance, abrasion resistance

*Excellent anticorrosion and chemical resistance to acids, alkali, salts etc.

*Excellent waterproof performance

*Good shock absorbing performance

*Excellent resistance to temperature variation

*Fast cure, application site back to service quickly

*Excellent durability to reduce maintenance cost for lifelong

*Extend the service life of sprayed structure

Application scopes

Anticorrosion and waterproof protection of construction, chemicals, transportation, metallurgy, electric power, aerospace, marine, shipbuilding and other fields.

Product information

Item Part A Part B
Appearance Pale yellow liquid Adjustable color
Specific gravity (g/m³) 1.12 1.05
Viscosity(cps)@25℃ 800 650
Solid content (%) 100 100
Mix ratio(by volume) 1 1
Gel time (second)@25℃ 4-6
Surface dry time(second) 15-40
Theoretical coverage (dft) 1.08kg/㎡ film thickness:1mm

Typical physical properties

Item Test standard Result
Hardness (Shore A) ASTM D-2240 92
Elongation rate(%) ASTM D-412 480
Tensile strength(Mpa) ASTM D-412 19
Tear strength (kN/m) ASTM D-624 68
Impermeability (0.3Mpa/30min) HG/T 3831-2006 Impermeable
Wear resistance(750g/500r)/mg HG/T 3831-2006 4.2
Adhesive strength(Mpa)concrete base HG/T 3831-2006 3.2
Adhesive strength(Mpa) steel base HG/T 3831-2006 11.3
Density(g/cm³) GB/T 6750-2007 1.02
Cathodic disbondment [1.5v,(65±5)℃, 48h] HG/T 3831-2006 ≤15mm

Chemical resistance

Acid resistance 10%H2SO4 or 10%HCI,30d No rust, no bubbles, no peel off
Alkali resistance 10% NaOH, 30d No rust, no bubbles, no peel off
Salt resistance 30g/L,30d No rust, no bubbles, no peel off
Salt spray resistance, 2000h No rust, no bubbles, no peel off
Oil resistance 0# diesel, crude, 30d No rust, no bubbles, no peel off
(For reference: the above data is acquired based on GB/T9274-1988 test standard. Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data)

Application environment

Environment temperature 0℃-45℃
Product pre-heat temperature 65℃-70°C
Pipe pre-heat temperature 55℃-65℃
Relative humidity ≤90%
Dew point ≥3℃

Application guide

Recommend spray machine GRACO H-XP3 Polyurea spray equipment
Spray gun Fusion-air purge or mechanical purge
Static pressure 2300-2500psi
Dynamic pressure 2000-2200psi
Recommend film thickness 1000-3000μm
Recoating interval ≤6h

Application note

Agitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product’s quality will be affected.

Spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of SWD polyurea speical primer please refer to SWD company’s other brochure.

Always apply SWD900 on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of SWD spray polyurea series.

Product curing time

Substrate temperature Dry Foot traffic Solid dry
+10℃ 30s  45min 7d
+20℃ 23s  15min 6d
+30℃ 17s  5min 5d

Note: the curing time varies with the environment condition especially the temperature and relative humidity.

Shelf life

* From the manufacturer date and on original package sealed condition:

Part A: 10 months

Part B: 10 months

*storage temperature:+5-35°C

Packing: Part A 210kg/drum, part B 200kg/drum

Make sure the product package sealed well

* store in cool and ventilated place, avoid direct sunshine exposure.

Product health and safety information

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

Integrity declaration

SWD guarantees all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.


Product detail pictures:

High-Quality Spray Foam Roofing Systems Manufacturers –  SWD900 spray polyurea elastomer anticorrosion waterproof protective coating  – SWD detail pictures

High-Quality Spray Foam Roofing Systems Manufacturers –  SWD900 spray polyurea elastomer anticorrosion waterproof protective coating  – SWD detail pictures


Related Product Guide:

Our focus on should be to consolidate and enhance the quality and repair of present products, in the meantime constantly establish new products to meet unique customers' requires for High-Quality Spray Foam Roofing Systems Manufacturers – SWD900 spray polyurea elastomer anticorrosion waterproof protective coating – SWD , The product will supply to all over the world, such as: Iraq, Finland, Thailand, Corporate goal: Customers' satisfaction is our goal, and sincerely hope to establish long-terms stable cooperative relations with customers to jointly develop the market. Building brilliant tomorrow together!Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
  • This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
    5 Stars By Katherine from Gabon - 2018.06.03 10:17
    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Aaron from Macedonia - 2018.06.12 16:22
    Write your message here and send it to us