High-Quality Polyurea Polyaspartic Coatings Manufacturers – SWD8027 polyaspartic abrasion resistance floor coating – SWD

short description:

Product Detail

Product Tags

Feedback (2)

With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Urethane Spray Paint , Aliphatic Polyurethane Floor Coating , Aliphatic Polyurethane Coating , Together with the everlasting target of "continuous top quality improvement, customer satisfaction", we have been sure that our products high quality is stable and trustworthy and our solutions are best-selling at your home and overseas.

High-Quality Polyurea Polyaspartic Coatings Manufacturers – SWD8027 polyaspartic abrasion resistance floor coating – SWD Detail:

Product descriptions

SWD8027 is a two-component material with aliphatic polyaspartic polyurea resin as the main film-forming material, with excellent corrosion resistance, color-change resistance and weather resistance. The product has high solid and low viscosity, good leveling, and meets the requirements of environmental protection; it has excellent workability, can be applied by any application method, and can be cured at low temperature 0 ° C in winter. The coating has excellent flexibility, wear resistance, impact resistance and chemical resistance. It is an ideal weather resistant and environment-friendly floor coating material.

Product application scope

Flooring of city Park Plaza, electronic plant, mechanical factory, chemical plant, pharmaceutical, food and other industrial floors, as well as various outdoor yellowing resistant and wear-resistant floors.

Product information

Item	A component	B component
Appearance	light yellow liquid	Color adjustable
Specific gravity(g/m³)	1.05	1.50
Viscosity (cps)@25℃	40-60	100-200
Solid content (%)	65	88
Mix ratio (by weight)	1	1
Surface dry time (h)	1
Pot life (h)@25℃	40min
Theoretical coverage (DFT)	0.15kg/㎡ film thickness 100μm

Physical properties

Item	Test standard	Results
Adhesion force (concrete base)		3Mpa
Pencil hardness		2H
Bending resistance (cylindrical)		≤1mm
Abrasion resistance (750g/500r) mg	HG/T 3831-2006	5
Impact resistance kg·cm	GB/T 1732	50
Anti-aging, artificial accelerated aging	GB/T14522-1993	Light loss < 1, pulverization < 1

Application instructions

Hand brush, roller

Air spray, with air pressure 0.3-0.5Mpa

Airless spray, with spray pressure 15-20Mpa

Recommend dft: 100-200μm (topcoat)

Recoating interval: min 2h, max 24h.

Application tips

Agitate part B uniform prior to application.

Strictly mix the 2 parts in right ratio and agitate uniform.

Seal the package well after use to avoid moisture absorption.

Keep the application site clean and dry, forbidden to contact with water, alcohols, acids, alkali etc

Product cure time

Substrate temperature	Surface dry time	Foot traffic	Solid dry time
+10℃	2h	24h	7d
+20℃	1.5h	8h	7d
+30℃	1h	6h	7d

Note: the curing time is different with environment condition especially when temperature and relative humidity changes.

Shelf Life

Storage temperature of environment: 5-35℃

* shelf life is from the manufacturing date and sealed condition

Part A: 10 months Part B: 10 months

* keep the package drum well sealed.

* store in cool and ventilated place, avoid sunshine exposure.

Package: part A: 25kg/barrel, part B: 25kg/barrel.

Product detail pictures:

Related Product Guide:

With our superb management, potent technical capability and strict quality command procedure, we go on to provide our shoppers with trustworthy high-quality, reasonable costs and outstanding services. We goal at becoming considered one of your most trustworthy partners and earning your pleasure for High-Quality Polyurea Polyaspartic Coatings Manufacturers – SWD8027 polyaspartic abrasion resistance floor coating – SWD , The product will supply to all over the world, such as: Cancun, Turkey, South Africa, Good quality and reasonable price have brought us stable customers and high reputation. Providing 'Quality Products, Excellent Service, Competitive Prices and Prompt Delivery', we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work whole-heartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.

Difference Between Polyurea And Polyaspartic