High-Quality Polyurea Flake Floor Manufacturers –  SWD9513 truck bed liner special polyurea  wearable protective coating  – SWD

products

High-Quality Polyurea Flake Floor Manufacturers – SWD9513 truck bed liner special polyurea wearable protective coating – SWD

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for Outdoor Spray Paint , Urethane Spray Foam Insulation , Kretus Polyaspartic , Please feel free to contact us at any time. We will reply you when we receive your inquiries. Please note that samples are available before we start our business.
High-Quality Polyurea Flake Floor Manufacturers – SWD9513 truck bed liner special polyurea wearable protective coating – SWD Detail:

Product features and advantages

*Solvent free, 100% solid content, safe, environmentally friendly, odor free.

*Rapid cure, can be sprayed forming on any bent surface, on slope and vertical spray to be a model, won’t make sagging.

*Dense coating seamless, good flexibility, high adhesive strength

*Excellent impact resistance, collide and abrasion resistance

*Excellent corrosion resistance and chemical resistance properties, such as acids, alkalis, salts, etc.

*Good shock absorption performance

*Excellent temperature change stability

*Fast cure, so that the construction area quickly revert

*Excellent durability to reduce maintenance costs for life

*Extend the service life of the coating structure

Application scopes

carriage wearable protection of truck, pickup truck, dump truck

Product information

Item A B

 

Appearance 窗体顶端

Pale yellow liquid

Adjustable color
Specific gravity (g/m³) 1.13 1.04
Viscosity(cps)@25℃ 650 720
Solid content (%)   100 100
Mixing ratio(volume ratio)  1 1
Gel time(second)@25℃ 3-5
Dry time(second) 10-20
Theoretical Coverage (dft) 1.03kg/㎡ film thickness:1mm

Typical physical properties

Acid resistance 10%H2SO4 or 10%HCI,30d No rust, no bubbles, no peel off
Alkali resistance 10% NaOH, 30d No rust, no bubbles, no peel off
Salt resistance 30g/L,30d No rust, no bubbles, no peel off
Salt spray resistance, 2000h No rust, no bubbles, no peel off
Oil resistance 0# diesel, crude,30d No rust, no bubbles, no peel off
(For reference: the above data is acquired based on GB / T9274-1988 test standard. pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires detail data)

Chemical resistance

Environment temperature 0℃-45℃
Product spray heating temperature 65℃-70°C
Pipe heating temperature 55℃-65℃
Relative humidity ≤80%
Dew point ≥3℃

Application environment

Recommend spray machine GRACO H-XP3 Polyurea spray equipment
Spray gun Air or machine self-cleaning coatings for spray gun
Static pressure 2300-2500psi
Dynamic pressure 2000-2200psi
Recommend film thickness 1000-3000μm
Recoating interval ≤6h

Product application guide

Recommend spray machine GRACO H-XP3 Polyurea spray equipment
Spray gun Fusion-air purge or mechanical purge
Static pressure 2300-2500psi
Dynamic pressure 2000-2200psi
Recommend film thickness 1000-3000μm
Recoating interval ≤6h

Application note

Agitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product’ quality will be affected.

spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of SWD polyurea speical primer please refer to SWD companies’ other brochure.

Always apply SWD spray polyurea on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of SWD spray polyurea series .

Product cure time

Substrate temperature Dry Walking intensity complete solidify
+10℃ 18s  45min 7d
+20℃ 13s  15min 6d
+30℃ 10s  5min 5d

Note: the curing time varies with the environment condition especially the temperature and relative humidity.

Shelf life

* From the manufacturer date and on the original package sealed condition:

Part A: 10 months

Part B: 10 months

*storage temperature:+5-35°C

Packing: Part A 210kg/drum, part B 200kg/drum

Make sure the product package sealed well

* store in cool and ventilated place, avoid direct sunshine exposure.

Product health and safety information

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

Integrity declaration

SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.


Product detail pictures:

High-Quality Polyurea Flake Floor Manufacturers –  SWD9513 truck bed liner special polyurea  wearable protective coating  – SWD detail pictures

High-Quality Polyurea Flake Floor Manufacturers –  SWD9513 truck bed liner special polyurea  wearable protective coating  – SWD detail pictures

High-Quality Polyurea Flake Floor Manufacturers –  SWD9513 truck bed liner special polyurea  wearable protective coating  – SWD detail pictures

High-Quality Polyurea Flake Floor Manufacturers –  SWD9513 truck bed liner special polyurea  wearable protective coating  – SWD detail pictures


Related Product Guide:

Persisting in "High high quality, Prompt Delivery, Aggressive Price", we've established long-term cooperation with clients from the two overseas and domestically and get new and old clients' superior comments for High-Quality Polyurea Flake Floor Manufacturers – SWD9513 truck bed liner special polyurea wearable protective coating – SWD , The product will supply to all over the world, such as: California, Oman, Jamaica, As an experienced factory we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of the company is to live a satisfactory memory to all the customers, and establish a long term win-win business relationship. For more information, please contact us. And It is our great pleasure if you like to have a personally meeting in our office.
  • The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
    5 Stars By Deborah from Monaco - 2017.09.16 13:44
    We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Irene from Brisbane - 2018.06.05 13:10
    Write your message here and send it to us