High-Quality Paint Marine Red Lead Primer Products – SWD168L polyurea special hole-sealing putty – SWD

short description:

Product Detail

Product Tags

Feedback (2)

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Polyurethane Spray , Polyaspartic Floor Coatings , Single Part Polyurea Garage Floor , We sincerely welcome pals to negotiate enterprise and start cooperation. We hope to join hands with pals in different industries to produce a outstanding foreseeable future.

High-Quality Paint Marine Red Lead Primer Products – SWD168L polyurea special hole-sealing putty – SWD Detail:

Product features and advantages

*The coating is seamless, tough and compact

*Strong adhesion, excellent impact resistance, collision resistance and wear resistance

*Excellent anti-corrosion and chemical resistance, such as acid, alkali, salt, etc

Application scopes

It is suitable for leveling, joint filling and hole sealing of metal base, concrete and cement mortar plastering.

Product information

Item	Results
Appearance	Flat and bubble free
Solid content (%)	≥90(liquid, no quartz sand added)
pot life h (25℃)	1
Surface dry time (h)	≤3
Mixing ratio	A:B=1:1, liquid: quartz sand=1:1-2
Solid dry time（h）	≤12
Theoretical coverage (dft)	0.7kg/m²( thickness 1000 um)

Physical properties

Item	Result
Adhesive strength	Concrete base: ≥4.0Mpa (or substrate failure) Steel base: ≥8Mpa
Impact resistance (kg·cm)	50
Salt water resistance, 360h	No rust, no bubbles, no peel off
Acid resistance (5％H₂SO₄_，168h)	No rust, no bubbles, no peel off
Temperature variation resistance （-40—+120℃）	Unchanged

Application environment

Environment temperature: 5-38℃

Relative humidity: 35-85%

The concrete surface should be PH<10, the substrate water content less than 10%

Dew point ≥3℃

Application tips

Recommended dft: 1000 um

Interval time: min 3h, max 168h, if the maximum interval time is exceeded or there is dust on the surface, it is recommended to use sandpaper to polish and clean before application.

Coating method: scraping

Application note

To ensure the surface is perfect and clean, remove the oil, mold, dust and other attached dirt on the surface, also remove the loose part to make sure it is solid and dry.

Mix the paint evenly before use, pour out the amount to use up, and close the lid immediately. The mixed paint must be used up within 60 minutes. Do not return the remaining products to the original paint barrel.

Mix part A and part B in right ratio, then mix with quartz sand or quartz powder together for use.

Do not add organic solvents or other coatings.

Curing time

Substrate temperature	Surface dry time	Foot traffic	Solid dry
+10℃	6h	24h	7d
+20℃	4h	12h	7d
+30℃	2h	6h	7d

Product cure time

Substrate temperature	Surface dry time	Foot traffic	Solid dry time
+10℃	2h	24h	7d
+20℃	1.5h	8h	7d
+30℃	1h	6h	7d

Note: the curing time is different with environment condition especially when temperature and relative humidity changes.

Shelf life

* storage temperature: 5℃-32℃

* shelf life: 12 months (sealed)

* store in cool and ventilated place, avoid direct sunshine, keep away from heat

* package: 20kg/bucket

Product health and safety information

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the latest Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

Integrity declaration

SWD guarantee all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. SWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.

Product detail pictures:

Related Product Guide:

Our aim would be to fulfill our shoppers by offering golden company, very good value and good quality for High-Quality Paint Marine Red Lead Primer Products – SWD168L polyurea special hole-sealing putty – SWD , The product will supply to all over the world, such as: Boston, Boston, Jordan, Establish long term and win-win business relationships with all our customers, share the success and enjoy the happiness of spreading our products to the world together. Trust us and you will gain more. Please feel free to contact us for more information, we assure you of our best attention at all times.

Paint Marine Red Lead Primer